Principle: The original point spectral confocal point light source is extended to line light source. And through high-speed data processing, a series of data is formed by sampling several point signals on the feedback line spectrum signal, and the high-precision scanning contour of the measured object can be obtained by point cloud processing and the high-precision height data of each position ...

Spectral confocal displacement sensor principle: a beam of white light (or multi-wavelength mixed light) through a small hole, through the lens will focus different wavelengths to the optical axis, dispersively form a rainbow distribution band, only irradiation in the optical axis and the object surface intersectionThe light passes through the splitter component and shines through the aperture t...

FPGA high-speed processing, microsecond response speed, 7KHz\15KHz\33KHz sampling frequencyAnalog output -10V~+10V,0~10V,0~5V, convenient for high real-time applicationVarious communication interfaces are available, such as Ethernet, EtherCAT, RS485/RS422Supports multiple sets of high-speed GPIO portsUp to 5 axis encoder trigger frequency division, high speed positio...

Measurement principle: When a beam of laser irradiates the measured object at a certain angle of incidence, the laser will reflect and scatter on the surface of the object. At this point, a lens can be used to converge and image the reflected laser onto the image sensor at another angle. When the measured object moves in the direction of the laser, the light spot on the image sensor will also move, and its displacement corresponds to the distance of the measured object's movement. From this, algorithm design can be used to calculate the movement distance of the measured object relative to the baseline.

Angle, range, working distance and other parameters are balanced, suitable for most application scenarios XL series is a light intensity enhanced version of the lens, with customized controller can increase the light intensity several times higher light intensity in the measurement application of high transmittivity, or high light absorption material, has a stronger measurement signal

Angle, range, working distance and other parameters are balanced, suitable for most application scenarios XL series is a light intensity enhanced version of the lens, with customized controller can increase the light intensity several times higher light intensity in the measurement application of high transmittivity, or high light absorption material, has a stronger measurement signal

Lens: Outer diameter D Maximum design Angle A Maximum measuring range R * Minimum spot diameter S*(C50 fiber) Working distance C resolution * Total length L Unit mm D65A63 series: diameter 65mm, Angle ±63°

Performance characteristics are similar to the D40A17, with slightly longer length and greater angular performance Diameter 40mm, suitable for most installation scenarios This model has a 90-degree light-out lens version that can measure side dimensions

Diameter 40mm, suitable for most installation scenarios This model has a 90-degree light-out lens version that can measure side dimensions Large spot accuracy, long working distance, moderate range, is a universal model The shortest model in the D40 series, suitable for applications where the length size is required

The extremely small size of 3.8mm in diameter is suitable for applications with high dimensional requirements This series is available in a 90-degree light-out lens version that allows you to penetrate into various small holes to measure the dimensional characteristics of the inner wall It can be equipped with an extension rod of about 500mm, and the outer diameter can be increased to the diameter of 4.3mm to measure the depth of the hole within 500

原理：将原来点光谱共焦的点光源扩展为线光源。并通过高速的数据处理，在反馈的线光谱信号上采样多个点信号组成数据序列，用点云处理的方式可以得到被测物的高精度扫描轮廓并输每个位置的高精度高度数据。特点1：立仪科技开发的线光谱共焦传感器与市面上基于三角法的线光谱原理不同，三角法原理线光谱对狭缝，深孔等特征无法测量，而立仪科技开发的线光谱特性则与点光谱相同，垂直向下测量，狭缝，深孔等特征依然可测特点2：